Features and further details

This is a custom made Dual Motherboard Stand Mount.

• Details: It is a clean black plastic design that is minimalistic. Designed to have a perfectly fit two motherboards on either side with a standard PC power supply in the middle. Whether ATX or Micro ATX; this stand will support these form factors. Please note that one side (left side/PSU side) motherboard sits upside down while the right side (SSD side) is upright. 

• Please look at photos to determine if your motherboards will support this design. 
• Lite Size Stand supports= ATX /\ ATX or MATX /\ ATX  Note- it only supports 1 MATX but does support 2 ATX motherboards.

• Standard Size Stand supports= ATX /\ ATX or ATX /\ MATX AND MATX /\ MATX or MATX /\ ATX     Note- it supports both 2 MATX and 2 ATX.

• The stand features dual SSD mounts that are friction fit. The left side has a ATX PSU mount with 4 screws holes. The motherboard stand can be mounted with 6/32 hex screw or M3 screws. Please don't over tighten as it is plastic and its easy to over thread the screw holes.

• Both stands support full size ATX power supplies. Please note that you will need a 24 Pin splitter to run both motherboards from 1 PSU. Your PSU should have at least 2x 8 Pin (4+4) CPU power cables. The standard length for those CPU power cables will allow them to work on the dual stands without needing a extension. Please be mindful of power draw for the PSU. You do not want to go over rating of your PSU otherwise it might stop working or worse, cause serious damage. I am NOT responsible for any damages that may occur. 

• Package Includes: Dual Motherboard Stand and 12x 6/32 PC Screws.